All-in-one latex paint

Features:The coating film has an elongation of 100% so that it can cover fine cracks.
The paint film polymer film can block moisture and breathe, and it is waterproof and breathable.
Anti-mildew, moisture-proof and alkali-resistant, good hiding rate, good scrub resistance and good stain resistance.
The cost is economical.

Scope of application:Need to solve the problem of fine cracks, waterproof, and pollution-resistant interior wall exterior wall base.

  1. Construction Process
  2. Technical Indicators
  3. Technical Indicators

-The base layer is required to be firm, dry, clean, free of ash and paint.
-Stir well before using the drum. If it is necessary for construction, it can be diluted with 0%-10% of water, but the hiding rate should be reduced, and should not exceed 15% (weight ratio), so as to avoid the phenomenon of washing-resistant drop or powder removal.
-It can be applied by roller coating, brush coating or airless spraying.
-The second coat can be applied about 3 hours after the first layer is applied.
-After the painting is completed, the tool can be cleaned with water.

- Construction performance: brushing two barrier-free-solid content: 53.5-55.5
-Contrast ratio: ≥0.93
- Washing resistance: ≥15000 times
- Theoretical dosage: 13-15m3 / liter / (dry film 30μm)
- Alkali resistance: no abnormality for 48 hours

- The maidenly series primer should be used as the base primer.
- Ensure that the moisture content of the substrate is<10% before painting.
- Unused products should be stored in a sealed condition.
- After the construction is finished, clean it with water in time.